KARNAK- Coatings and Cements

Cements: 

Flashing Cement is a general purpose product for repairing leaks in shingles, concrete, metal or asphalt roofs, flashings on walls, chimneys, flues, downspouts and cornices. It is excellent for sealing cracks in concrete and brick, as a joint filler for precast roof slabs and for general purpose use in maintenance of exposed buildings and structures.

19AF Flashing Cement

 

* We stock in 5 gallon containers.


Karnak #19AF Flashing Cement is a scientifically compounded composition of selected asphalts, mineral fibers, and refined solvents that are manufactured to a heavy consistency for application by trowel to provide a durable, elastic coating of excellent adhesion and high resistance to water and weathering. This product dries to a tough, flexible, waterproof and corrosion proof coating which gives excellent performance over wide ranges of temperature and weather conditions. Karnak #19AF Flashing Cement is available in 3 consistencies: Summer, Winter and Semi-grade.


34 Utility Grade Asphalt Cotton Fabric

* We stock 4″ , 6″, 12″ and 36″ Rolls. Each roll is 150′ long.
Karnak #34 Utility Grade Cotton Fabric is a strong cotton fabric, thoroughly impregnated with highly specialized bitumens. This exclusive Karnak process permits the fabric to unroll easily, without distortion. It can be applied smoothly and without wrinkles. The open mesh construction of the fabric allows the surface coatings to penetrate through and interlock, thereby providing a firm mechanical bond between coatings, and insuring long life of the application. This strong elastic interlocking system is very pliable and prevents rupture due to expansion and contraction of the applied surfaces. Karnak #34 Utility Grade fabric was developed to meet the need for an economical, lighter weight fabric.

USES


Karnak #34 Utility Grade Fabric is useful for roof repairs, flashings, parapet walls, coverage of entire roof areas and for waterproofing of building foundations, retaining walls, and wherever construction is exposed to the elements.

 

Asphalt Coatings:

Fibered and Non-Fibered Roof Coatings may be used on smooth surface BUR, or SBS Modified Bitumen Membranes, metal surfaces and roll-roofing as a protective coating.

27AF Fibered Perfectseal Aluminum Coating

* We stock in 5 gallon buckets. Each bucket will cover 300-400 sq ft.


Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating is made of selected asphalts and pigment flakes of pure aluminum, blended with petroleum solvents and mineral fibers. When Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating is applied to the roof, the aluminum flakes leaf to the surface, forming a reflective, metallic shield over the base material.

The advantages of this metallic aluminum shield are twofold:

  • The asphaltic oils in the base coating are protected from harmful intense rays of the sun by the reflective properties of the aluminum. Over 50% of the sun’s rays are reflected by this aluminum shield, thereby preventing these oils from being “cooked” out of the base coating. The coating, therefore, retains its resilient characteristics and will not prematurely crack or dry out.
  • During the hot summer months, Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating will help reduce indoor building temperatures and improve inside living and working conditions. Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating prevents the sun’s rays from penetrating the roof coating and passing the heat into the   building interior.

 

28AF Non-Fibered Perfectseal Aluminum Coating

* We stock in 5 gallon buckets. Each bucket will cover 300-400 sq ft.


Karnak #28 Non- Fibered Perfectseal Aluminum Roof Coating is made of selected asphalts and pigment flakes of pure aluminum blended with petroleum solvents and mineral fillers. When Karnak #28 Non-Fibered Perfectseal Aluminum Coating is applied to the roof, the aluminum flakes leaf to the surface, forming a reflective, metallic shield over the base material.

*This product is virtually the same as the Fibered, but is better used on new roofs, or roofs without damage.

 

71AF Fibered Asphalt Roof Coating (Black) 

* We stock in 5 gallon buckets. Black Roof Coating is thicker than Aluminum and may not go the full 300-400 sq ft.


Karnak #71AF Fibered Roof Coating is a superior quality coating consisting of selected asphalts, mineral fibers and mineral spirits designed to provide excellent weathering protection on most roof surfaces.

107 Velvet Roof Coating- Non-Fibered Roof Coating (Black)

* We stock in 5 gallon buckets. Black Roof Coating is thicker than Aluminum and may not go the full 300-400 sq ft.


Karnak #107 Velvet Roof Coating is a non-fibered specially formulated black coating for use on all types of smooth surface asphalt roofs. It is prepared from selected asphalts and is carefully admixed with refined solvents to form a heavy paint consistency. Karnak #107 Velvet Roof Coating will withstand the rigors of hot summer temperatures and provide excellent protection against the ravages of weather and corrosion.

 

Asphalt Primer: 

It is especially designed for use as a general utility prime coat for concrete, gypsum, masonry, brick and metal surfaces over which waterproofing, damp-proofing, roof coatings and other asphaltic products are to be applied. This thin solution readily penetrates pores and seals dusty masonry surfaces to provide a firm base for such coatings. It is specified as a prime coat previous to the application of the membrane system of waterproofing on all concrete structures. It is also very efficiently used as a felt primer on old dried out built-up roofs where penetration is required to revitalize the base surfaces before roof coatings or cold applied systems are applied.

108AF Asphalt Primer

*We stock 108 in 1 Gallon buckets. 1 Gallon will cover 100 to 200 sq ft. We also carry Quick Dry 108 in Spray Cans.


General purpose, penetration asphalt primer used for the preparation of all types of surfaces previous to the application of hot or cold asphalt coatings. Karnak #108 Asphalt Primer is a controlled preparation of a highly ductile, soft asphalt in a refined solvent.

 

102AF Asphalt Primer

* We stock 102 in 5 gallon buckets. Apply at the rate of 1/2 to 1 gallons per 100 square feet depending upon the condition and porosity of the surface to be primed.


Karnak #102 Asphalt Primer is a material composed of selected asphalts and refined solvents. It has good resistance to temperature change, yet dries to a tough film. Karnak #102 Asphalt Primer provides a firm base and better adhesion for the application of asphalt coatings. The Karnak #102 Asphalt Primer is designed for priming surfaces prior to the application of asphalt based dampproofing and waterproofing and is not to be used as a roof coating.

 

Adhesives:

78AF Cold Process Cement

*We stock in 5 gallon buckets.

Karnak #78AF Cold Process Cement is a multi-purpose fast setting asphalt cement which can be used a blind nail or lap cement with prepared rolled roofing. Karnak #78AF Cold Process Cement can also be used in conjunction with any of Karnak’s Cold Process Roofing Systems (i.e.: P-21, P-22) or with other manufacturers’ coated fiberglass felts and base sheets.

 

Miscellaneous:

3036 Poly-Mat

*We stock 18″ and 36″ Rolls. Each roll is 180′ long.

Karnak #3036 Poly-Mat spunbound polyester is a sheet product of continuous-filament polyester fibers that are arranged, highly dispersed, and bonded at the filament junctions. While the chemical and thermal properties of Karnak #3036 Poly-Mat are essentially those of polyester fiber, the product’s spunbound structure endows it with an extraordinary combination of physical properties.

The distinctive characteristics of Karnak #3036 Poly-Mat include high tensile strength compiled with high elongation, outstanding tear strength and toughness, high bulk and porosity, nonraveling edges, and excellent dimensional stability.

709 Karna Klean

Karna-Klean is a biodegradable non-toxic petroleum free cleaner/degreaser with all natural ingredients. The base ingredient in this highly concentrated formulation is a natural solvent obtained from orange peel and pulp, giving Karna-Klean a pleasant scent of fresh oranges. Karna-Klean is an extremely versatile cleaner/degreaser capable of removing the toughest grease, tar, lubricants, adhesives and asphalt. Karna-Klean can be safely used to clean aluminum, stainless steel, chrome, concrete and most plastics and painted surfaces. Using Karna-Klean can reduce your costs especially if you are presently using products containing petroleum distillates, alcohol or other hazardous materials. Karna-Klean affords you the opportunity to utilize one product to clean and degrease your entire facility safely and effectively.

USES


Dissolves and removes asphalt, tar, grease and asphalt emulsions. Cleans asphalt and tar from brick, cements, stucco, concrete and metal siding and all types of roofing equipment and vehicles. Also cleans and removes ink, adhesives, oil and most paints, graphite, dirt and scale. Note: Karna-Klean is a solvent. As a result, some staining may occur.

 

For more products, visit their website at: http://www.karnakcorp.com

About the Author